Natural Body Butter

Mixture Instructions

Body Care Mixing InstructionsMany people have their own methods for bottling products—using funnels, heating slightly, or pumps. After much trial and error, we’ve found a simpler alternative: no funnels, bowls, mixers, boiling water needed.You Will Need:Plastic containerScale (optional)Plastic zip-lock or freezer bagsSpoonFragrance and colour (optional)Steps:1. Choose the Right BagSelect a zip-lock or freezer bag about twice the size of the amount you intend to mix. Always use new bags to prevent hygiene issues and cross-contamination.2. Prepare the BagPlace the bag inside a plastic container for stability. If using a freezer bag, roll the edges over the rim of the container. Avoid touching the inside of the bag where it will contact the product.3. Measure and Add BaseIf using a scale, place the container and bag on it and “zero” the weight. Add the pre-measured amount of base to the bag (no more than halfway full).If adding fragrance:With a scale: add 0.75%–1% fragrance.Without a scale: 1 teaspoon (5 ml / 1/6 oz) will scent approximately 20 oz of lotion or cream.4. Add Colour (optional)5. Seal and MixZip or twist-tie the bag securely. Remove it from the container and massage the bag with your fingers to blend the fragrance and colour. The bag’s transparency makes it easy to see when mixing is complete.6. Fill BottlesOnce fully blended, cut a small corner off the bag using sanitized scissors and pour into bottles. Use the entire contents in one go to reduce contamination risks. If you must set the bag down, keep the cut tip away from surfaces.